Huawei NetCol5000-C030 User Manual page 21

NetCol5000-C(030, 032, 065) In-row Chilled Water
Smart Cooling Product
User Manual
●
High Reliability
●
●
●
●
●
High Compatibility
●
●
Intelligent Monitoring
●
●
Quick Installation and Commissioning
●
●
Easy Maintenance
●
Issue 04 (2021-03-15)
Wet film humidifier (optional): Lowers water quality requirements and
supports a long replacement interval, and saves energy by over 95%
compared with a traditional electrode humidifier.
Teamwork control: Enables smart cooling products to work in turn to avoid
competitive operating and supports dynamic cooling capacity allocation and
backup of the main control system.
Dual power supplies: When the active power supply fails, the standby power
supply takes over automatically. When the active power supply is recovered,
the power supply is automatically switched back to the active power supply.
The smart cooling product supports a wide input voltage range to adapt to
poor power grids.
Intelligent differential pressure control (optional): Solves the issue of hot
spots due to insufficient air volume to improve reliability.
Temperature and humidity sensor: A maximum of ten remote ambient
temperature and humidity sensors can be configured to monitor the
temperature and humidity of data centers, improving reliability.
Power supply: The NetCol5000-C can run in the working condition where the
input system is 220 V to 240 V AC, single-phase, and 50 Hz or 60 Hz. They
can protect against overload and short circuits.
Control mode: The NetCol5000-C supports multiple control modes, including
air supply control, cold aisle control, return air control, hot aisle control, and
pressure differential control. You can select control modes based on the
characteristics of your data centers.
Users can monitor and configure the smart cooling product on a client.
The smart cooling product provides a 7-inch thin film transistor (TFT) true-
color touchscreen to display the device running mode and status. You can set
system parameters using the touchscreen. This achieves good human-
machine interaction.
After the equipment is leveled and secured onsite, users need only to connect
pipes and cables before starting the equipment.
Startup wizard: A startup wizard is provided to guide operators through the
commissioning process. The smart cooling product running data is collected
automatically, which helps O&M personnel evaluate the status of the key
components of the smart cooling product, and simplifies O&M.
Real-time display: The cooling capacity, air volume, power, and fan speed can
be displayed in real time on the control panel, which helps O&M personnel
grasp the running status of smart cooling products.
Copyright © Huawei Technologies Co., Ltd.
2 Product Description
13