Setting Communications Parameters (Snmp Protocol) - Huawei NetCol5000-C030 User Manual

NetCol5000-C(030, 032, 065) In-row Chilled Water
Smart Cooling Product
User Manual
Parameter
IP address
Subnet mask
Gateway
Step 3 Tap Submit.
Step 4 On the home screen, choose Settings > Comm Settings > Modbus Settings.
Step 5 Set parameters for Modbus TCP by following instructions.
Table 4-10 Modbus TCP parameter settings
Parameter
Link mode
Client
encryption
Server
encryption
NMS IP
address
NMS port
number
----End

4.5.4.3 Setting Communications Parameters (SNMP Protocol)

Issue 04 (2021-03-15)
Setting Method
Set according to the actual plan.
Set according to the actual plan.
Set according to the actual plan.
Setting Setting Method
Server, ● If you set Link mode to Server, the smart
Client, Server
and client
● If you set Link mode to Client, the smart
● If you set Link mode to Server and client, the
Enable, This parameter is configurable when Link mode is
Disable set to Client.
Enable, This parameter is configurable when Link mode is
Disable set to Server.
- Enter the actual IP address of the NMS. IP
addresses of the display panel, NMS client, and
NMS server must be unique. This parameter is
configurable when Link mode is set to Client.
- It is recommended that you retain the default
value. If you need to change the value, enter a
value as required. This parameter is configurable
when Link mode is set to Client.
Copyright © Huawei Technologies Co., Ltd.
cooling product, as a server, supports two client
connection and establishes communication.
cooling product, as a client, can connect to a
remote server and establish communication.
smart cooling product, as a server, supports two
client connection and establishes
communication. In addition, the smart cooling
product, as a client, can connect to a remote
server and establish communication.
4 Power-On Commissioning
105