NetCol5000-C(030, 032, 065) In-row Chilled Water
Smart Cooling Product
User Manual
4.5 Initial Configuration
4.5.1 Setting Temperature and Humidity Values and
(Optional) Enabling T/H Sensors
Prerequisites
●
●
●
Procedure
Step 1 On the home screen, choose Settings > System Settings > T/H sensor.
is displayed.
Figure 4-4 Setting temperature and humidity values
Step 2 Set Cold aisle sensor 1 to Enable.
Step 3 Set the temperature and humidity values by referring to
Issue 04 (2021-03-15)
The T/H sensors outside the cabinet need to be enabled when they are
installed, otherwise, skip
If you need to enable a humidity and temperature sensor, log in as the admin
user.
This section describes how to enable Cold aisle sensor 1.
NO TE
You are not recommended to modify the parameters not listed in
Copyright © Huawei Technologies Co., Ltd.
Step
2.
4 Power-On Commissioning
Figure 4-4
Table
4-4.
Table
4-4.
93