Yamaha T8 Rigging Manual page 231

Outboard Rigging Guide - 2001
Change in the
Control Lever Position
WARNING
When using the right-hand remote control box
as the left-hand without changing the arrange-
ment of the inner parts, do not forget that the
control levers have to be moved in opposite
directions to each other.
The remote control box permits to change the
control lever position from the right side to the
left side or vice versa.
1. Remove the cover, packing, mounting flange,
back plate, dwell plate, and cam plate out of
the remote control box according to steps 1,
2, 3, and 5 (page 4-42 & 4-43).
705 Flush Side Mount Remote Control Ass'y.
2. Remove the circlip and plain washer from the
throttle shaft, loosen the adjusting screw, and
remove the throttle arm assembly and bush-
ing.
3. Remove the brake disk and brake shoe
assembly.
1 Circlip
2 Plain Washer
3 Throttle Arm Assembly
4 Brake Shoe Assembly
5 Brake Disk
6 Adjusting Screw
4. Loosen the two hexagon head bolts and
remove the throttle shaft.
1 Throttle Shaft
4-44