Yamaha T8 Rigging Manual page 136

Outboard Rigging Guide - 2001
Battery Isolator Wiring
For model year 2001, Yamaha has changed the
battery isolator leads. The 3.1L Salt Water Series
225/250hp, carburetor 150/V150 and all HPDI
engines will remain the same.
The OX66 V-Max 200/225/250hp and OX66 2.6L
engines have received a change as pointed out
below.
Length
Number of Wires
Isolator Lead Required
OX66 V-Max 200/225/250hp will come with a
new battery cable. The battery cable length has
also been changed.
Part Number
Type of Installation
1 Motor 2 Batteries & No Battery Switch
2 Motors 3 Batteries & No Battery Switch
1 Motor 2 Batteries & On/Off Battery Switch
2 Motors 3 Batteries & On/Off Battery Switch
2 Motors 3 Batteries & 1/Both/2 Battery Switch
Bass Boat 12/24 Volt Trolling Motor (3 pin plug)
Bass Boat 12/24 Volt Trolling Motor (4 pin plug)
Bass Boat 24 Volt ONLY Trolling Motor
WARNING
The battery isolator cannot be used on a 24/36 volt trolling motor system. A short could result caus-
ing a fire. Consult the trolling manufacturer for wiring recommendations.
BATTERY ISOLATOR LEADS
2000
13.3 ft
3
Not Required
2000
67H-81949-00-00
Refer To
Page 3-26
Page 3-26
Page 3-27
Page 3-28
Page 3-29
Page 3-30
Page 3-31
Page 3-32
3-25
Battery Installations
2001
11.0 ft
2
Requires Part # 68F-81949-00-00
2001
68F-81949-00-00