Network Setup Options; Port - Canon imagePRESS Server G200 Configuration And Setup

Verify New Password
Retype the new password, exactly as you typed it initially. The new password is in effect after you save changes and
restart the imagePRESS Server.
Login Timeout
Specify the amount of inactive time that can pass before the Administrator is automatically logged off.

Network setup options

To access Network setup options from the printer control panel, press the Main Menu button, press Show All if the
Fiery logo is not displayed, then press Fiery > Tools > Setup > Network.
For more information, see

Port

The following setup options are available in the Port group.
Ethernet
Ethernet Speed
Choose the appropriate speed of the network.
You can allow the imagePRESS Server to detect automatically the speed in any of these cases:
•
The network speed is unknown.
•
The network environment is mixed.
•
The network uses 1 Gbps.
802.1x
The imagePRESS Server can seek authentication from an 802.1x authentication server (such as a RADIUS server),
often through an intermediate access point (an authenticator).
The imagePRESS Server seeks this authentication at startup, or when the Ethernet cable is disconnected and
reconnected. If the imagePRESS Server is successfully authenticated, it is allowed access to the network.
Enable 802.1x Authentication
Select to allow the imagePRESS Server to seek authentication from an 802.1x authentication server.
Access imagePRESS Server Setup options from the printer control panel
Configuration and Setup
Setting up from the printer control panel
on page 31.
36