Printer Default Personality; Variable Data Printing (Vdp) Settings; Freeform 1 Record Length; Native Document Settings - Canon imagePRESS Server G200 Configuration And Setup

Printer Default Personality

Sets the personality of the printer. To access this option, choose Configure > RIP > Printer Default Personality.
•
If set to Auto, the PDL type of incoming jobs is automatically detected and sent to the appropriate interpreter.
•
If set to PCL, incoming jobs are sent to the PCL interpreter. If set to PS, incoming jobs are sent to the PS
interpreter.

Variable Data Printing (VDP) settings

To access the VDP settings, open Configure and select RIP > VDP.

FreeForm 1 Record Length

Defines the length of each record, either based on the number of pages in the variable job, or the number of pages in
the FreeForm Master.

Native Document settings

To access the Native Document settings, select Configure > RIP > Native Documents.

Enable Native Document conversion using PrintMe

Enables the imagePRESS Server to process native document file formats through the PrintMe Cloud Service.
Send licensing updates to the Fiery Administrator email address
Enables the imagePRESS Server to send licensing updates to the administrator email address. E-mail Service must be
enabled, and an administrator email address must be configured.
Note: This option is only available through Configure. It is not available through the printer control panel.
Note: This option is only available when Enable Native Document conversion using PrintMe is selected.
Configuration and Setup
Configuring print job processing settings
74