Table of Contents
Advertisement
•
Check Email System (only available when email is enabled)
If email is enabled on the imagePRESS Server, use to send a test email.
•
Check Video Board
Use to run a diagnostic on the video board.
Calibrate
Calibrate the imagePRESS Server using ColorCal. For more information, see Color Printing. If an Administrator
password has been set, you must enter it to access Calibration.
Note: Calibration can only be performed using paper sizes that are A4/Letter or greater. Trays that are loaded with
smaller paper are not included in the list of tray options.
Access imagePRESS Server Setup options from the printer control panel
You can use the Setup feature on the printer control panel to perform initial setup.
1 Make sure that the imagePRESS Server is not printing or processing files.
2 On the printer control panel, press the Main Menu button.
3 If the Fiery logo is not displayed, press Show All.
4 Press the Fiery logo.
The imagePRESS Server tabs appear.
5 Confirm that the imagePRESS Server is still Idle.
6 Press Tools.
7 To access the configuration options, press Setup.
8 If prompted, log on with Administrator privileges: Enter the password, scroll down, and click Login.
The default Administrator password is Fiery.1 (case-sensitive).
Note: The Administrator login automatically times out after the time interval specified in setup. The default
timeout is 5 minutes. If the timeout message displays, scroll down and press OK.
After viewing or changing any settings on the tabs you can return to the main screen by pressing Cancel or Save
Changes.
9 To implement any configuration changes, reboot the imagePRESS Server.
Server setup options
To access Server setup options from the printer control panel, press the Main Menu button, press Show All if the
Fiery logo is not displayed, then press Fiery > Tools > Setup > Server.
Configuration and Setup
Setting up from the printer control panel
31
Hide quick links:
Advertisement
Table of Contents
