Canon imagePRESS Server G200 Configuration And Setup page 56

Configuration and Setup 56
Setting up from the printer control panel
Advanced smoothing
Select whether to smooth the edges of text, curved line art, and ornamental characters. Adjusts text objects by
making them thicker in a vertical direction. Select Level 1 to smooth objects. Select Level 2 to further smooth objects
(compared to Level 1).
Advanced smoothing for graphics
Specify whether to smooth the edges of curved line art.
Advanced smoothing for text
Specify whether to smooth the edges of text and ornamental characters.
Printer's halftone
Specify a halftone screening method.
For more information about halftone screening, see Printing.
2-sided printing
Use this option to print on both sides of the paper.
For more information about duplex (2-sided) printing, see Printing.
Horizontal text width adjustment
Adjusts text objects by making them thicker in a horizontal direction. Select Level 1 to thicken the width of text
objects. Select Level 2 to further thicken the width of text objects (compared to Level 1).
Note: The horizontal or vertical direction is determined by the direction of paper output. The main scanning
direction is horizontal. For long edge feed, the long side is recognized as horizontal, and the short side is recognized
as vertical. For short edge feed, the long side is recognized as vertical and the short side is recognized as horizontal.
Gradation smoothing
Select Coarse or Fine to smooth the gradation if you see banding in your print job. Coarse provides more gradation
smoothing than Fine.
Image compression optimization
Select On to achieve a good balance between image quality and compression. The imagePRESS Server uses extremely
efficient lossless compression to ensure that pages are delivered to the printer fast enough to prevent cycling.
When on, images are divided into multiple blocks. The printer then selects an appropriate compression method for
each block and applies it to the block.