Canon imagePRESS Server G200 Configuration And Setup page 45

Port number
48384-48399
52075
EFI ports
Canon ports
IP Filtering
Enable IP Filter
Choose whether to enable IP filtering on the imagePRESS Server. By default, the imagePRESS Server permits all
IP addresses. You can control access to the imagePRESS Server by specifying an IP address or a range of IP
addresses that the imagePRESS Server permits or rejects. This prevents unlimited access to the imagePRESS
Server over your network and ensures network security in your environment.
Specify an end IP address that is larger than the start IP address. You may create up to 6 filters (ranges of IP
addresses to permit or reject). 0.0.0.0 and 255.255.255.255 are not valid IP addresses.
Default Policy
Choose Accept to accept IP addresses other than the IP addresses you specify. Choose Deny to reject IP
addresses other than the IP addresses you specify.
IP Range
Select a filter (user-defined range of IP addresses for filtering).
Add Filter
Use to create a range of IP addresses for filtering and specify the filter policy for the IP address range.
When Add Filter is pressed, the Enter IP Address Range window appears.
Edit Filter
Use to edit an existing filter (user-defined range of IP addresses for filtering).
When Edit Filter is pressed, the Edit IP Address Range window appears.
Protocol
Canon utilities
FTP
EFI utilities and other
functions
Canon utilities
Setting up from the printer control panel
Notes
Inbound traffic can be allowed or blocked only by allowing
or blocking traffic for all Canon ports in this table.
Inbound traffic cannot be blocked for this port.
This option in the ports list allows or blocks traffic to all EFI
ports and Fiery utilities ports listed in this table. We
recommend leaving these ports open, since they are required
to support Command WorkStation and the printer driver
Two-Way Communication feature.
This option in the ports list allows or blocks traffic to all
Canon ports listed in this table. We recommend leaving
these ports open, since they are required for full access to the
printer network functions and printer driver functions.
Configuration and Setup 45