Printer Setup Options; General Setup - Canon imagePRESS Server G200 Configuration And Setup

Hide thumbs Also See for imagePRESS Server G200:
Table of Contents

Advertisement

Bonjour Service Name
Enter the Bonjour service name. This name can be a maximum of 64 characters.
Note: The last 3 bytes of the MAC address are automatically appended to the Bonjour Service Name.
Preferred Printing Protocol
Choose the protocol that the imagePRESS Server uses when using the Bonjour service. The list displays only the
protocols that you have enabled.
Jobs sent over Bonjour are sent to the default print connection for the selected protocol. For example, if you
choose LPD, jobs are sent to the connection that you chose for LPD jobs
default connection can be defined (such as for IPP), the Print queue is used.
Enable Direct Mobile Printing
Direct Mobile Printing allows direct wireless printing to the imagePRESS Server from supported mobile devices.
The mobile devices must be connected to the same wireless-network subnet as the imagePRESS Server to print
using Direct Mobile Printing.
Bonjour must be enabled to use Direct Mobile Printing.
For more information about Direct Mobile Printing, see

Printer setup options

To access Printer setup options from the printer control panel, press the Main Menu button, press Show All if the
Fiery logo is not displayed, then press Fiery > Tools > Setup > Printer.
For more information, see

General Setup

Use these settings to specify the basic characteristics of the printer.
Note: The Hold queue, Print queue, or both must be published to enable users to print to the imagePRESS Server
over a TCP/IP network, and to provide access to Fiery Command WorkStation package and WebTools.
Personality
Sets the personality of the printer. The settings have the following impact:
If set to Auto, the PDL type of incoming jobs is automatically detected and sent to the appropriate interpreter.
If set to PCL, incoming jobs are sent to the PCL interpreter. If set to PS, incoming jobs are sent to the PS
interpreter.
Access imagePRESS Server Setup options from the printer control panel
Setting up from the printer control panel
(Default LPD queue
Direct mobile printing
on page 70.
Configuration and Setup
on page 46). If no
on page 31.
54

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents