Huawei FusionModule1000A40 Maintenance Manual page 58

FusionModule1000A40 Prefabricated All-in-One
Data Center
Maintenance Guide
Check Item
Check whether the Holes
DIP switch setting is
correct.
Figure 4-1 Holes DIP
switch setting
Check whether the Class
DIP switch setting is
correct.
Figure 4-2 Class DIP
switch setting
Check whether the Mode
DIP switch setting is
correct.
Figure 4-3 Mode DIP
switch setting
Issue 04 (2021-02-10)
Check Content
Holes DIP switch
setting and the actual
number of sampling
holes
Class DIP switch
setting
Mode DIP switch
setting
Copyright © Huawei Technologies Co., Ltd.
4 Common Faults and Troubleshooting Measures
Expected Troubleshooting
Result
The DIP switch Set the DIP switch on the
setting is the control board to a correct
same as the value and reset the board.
actual number
of sampling
holes.
The DIP switch Set the DIP switch on the
setting is 2, that control board to a correct
is, the sensitivity value and reset the board.
class is 2.
The DIP switch Set the DIP switch on the
setting is 1, control board to a correct
indicating that value and reset the board.
the device is
running
properly.
51