Daily Maintenance; Monthly Maintenance - Huawei FusionModule1000A40 Maintenance Manual

FusionModule1000A40 Prefabricated All-in-One
Data Center
Maintenance Guide

3.3 Daily Maintenance

Table 3-2 Daily maintenance checklist
Category Maintena
nce Item
Power Integrated
supply UPS
and
distributi
on
system
ECC800 Check
WebUI FusionMo
dule1000
alarms.
Camera
images
and
coverage
Fire VESDA
extinguis and its
hing power
system supply

3.4 Monthly Maintenance

Issue 04 (2021-02-10)
Operation
Observe the power
input status
indicator.
On the ECC800
WebUI, choose
Home > Active
Alarms or Query >
Historical Alarms.
On the ECC800
WebUI, choose
System Settings >
Video Settings >
Video Information
in the monitoring
system, and you
can click Access
Link on the page
to access the video
link.
Check the working
status of the
VESDA and its
power supply.
Copyright © Huawei Technologies Co., Ltd.
Check Standard Troubleshooting
Observe the If the input voltage is
indicator abnormal, check the power
luminance, the grid status and input cable
indicators are on. connection.
If the power supply is normal
but an indicator is off or
generates dim light, replace
the indicator.
No alarm is Clear the alarm by referring to
displayed in the the ECC800 documents.
alarm information
area.
Alarm short Check whether the SIM card is
messages can be properly installed. Replace the
received. SIM card if it is faulty.
The video images If no video image is displayed:
are properly
1. Connect the camera cable
displayed.
2. If the cable is properly
The coverage of If the camera coverage does
the camera is not meet the monitoring
optimal. requirement, adjust the
camera coverage.
The VESDA and its If the VESDA or its power
power supply are supply is abnormal,
normal. troubleshoot by following
instructions in documents
delivered with the VESDA.
3 Routine Maintenance
again.
connected, replace the
camera.
15