Setting The Wireless Router Ip Address In Ims Integration - Huawei TP3106 Commissioning Manual

HUAWEI TP3106&TP3118&TP3118S
Commissioning Guide
7.2 Setting the Wireless Router IP Address in IMS
integration
By default, the NETGEAR wireless router' IP address is 192.168.1.1, and user name and
password for logging into its web interface are admin and password respectively. To restore
the wireless router to its default settings, press and hold the Reset button for at least 10 seconds.
Figure 7-1 Network of the TP3106's wireless router
Connect the wireless router's LAN port to the network switch (Switch port 15). Assign the LAN
port an IP address (such as 172.16.21.64) that is in the same network segment with the
telepresence host and telepresence codecs. Connect the touch panel (default IP address:
172.16.21.65) to the wireless router through Wi-Fi, then to the telepresence host. Connect the
wireless router's WAN port to the network switch (Switch port 7). Assign the WAN port an
external network IP address (such as 10.11.250.253)
Setting the IP Address
Step 1 Connect a computer directly to the wireless router through the LAN interface.
Step 2 Enter 192.168.1.1 in the Internet Explorer browser address bar and press Enter. A login dialog
box is displayed, as shown in the following figure. Enter admin for the router user name and
password for the router password.
Issue 01 (2015-02-12) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
7 Appendix
163