HUAWEI TP3106&TP3118S&TP3118 Telepresence
Installation Guide
Procedure
Step 1 Mount the hanging corners to the ends of the rear panel.
Step 2 Place the power supply controller from the top down in the location shown in
Step 3 Tighten the screws to secure the power supply controller.
----End
11.7 Installing the Network Switch
Context
Before installing the network switch, verify that its network ports can communicate with each
other.
Figure 11-19 Network switch
Procedure
Step 1 Mount the hanging corners to the ends of the rear panel.
Step 2 Place the network switch from the top down in the location shown in
Step 3 Tighten the screws to secure the network switch.
----End
11.8 Installing the Wireless Router
Before installing the wireless router, power it on and verify that you can log in to its Web
interface, using the default IP address 172.16.21.64, to configure its parameters.
shows the wireless router.
Figure 11-20 Wireless router
Issue 07 (2013-11-08)
Figure 11-19
shows the network switch.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
11 Installing Telepresence Devices
Figure
Figure
11-1.
Figure 11-20
11-1.
103