Huawei TP3106 Commissioning Manual page 24

HUAWEI TP3106&TP3118&TP3118S
Commissioning Guide
----End
Configuring VLANs
If the following configuration requires an account authentication, enter the default user name:
admin s, the default password: password
Run the following commands:
sys
vlan 2
VLAN1.)
interface Ethernet 0/0/13
port link-type access
port default vlan 2//Assign the network ports to VLAN2.
quit//Quit the network port settings.
interface Ethernet 0/0/14
port link-type access
port default vlan 2
quit
interface Ethernet 0/0/15
port link-type access
port default vlan 2
quit
interface Ethernet 0/0/16
port link-type access
port default vlan 2
quit
interface Ethernet 0/0/17
port link-type access
port default vlan 2
Issue 01 (2015-02-12)
Figure 2-9 Settings
//Access the system settings.
//Set up VLAN 2. (By default, all ports are assigned to
//Set network port 13's network mode to Access.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
//Access network port 13's settings.
2 Deployment Preparation
16