Page 2
Notice The purchased products, services and features are stipulated by the contract made between Huawei and the customer. All or part of the products, services and features described in this document may not be within the purchase scope or the usage scope. Unless otherwise specified in the contract, all statements, information, and recommendations in this document are provided "AS IS"...
The TP3218 has two rows of multi-functional conference tables. The front row is the same as that of the TP3206. The second row has six tabletop segments and 12 seats. The TP3218S has two rows of multi-functional conference tables. The front row is the ...
Page 14
For details about steps , and , see the HUAWEI TP3206_TP3218S_TP3218 Cable Connection Guide. When installing the TP3206, you do not need to connect the V24 cable in step For details about steps , see the HUAWEI TP3206_TP3218S_TP3218 Commissioning Guide.
This chapter provides telepresence room decoration requirements, including acoustics, illumination, and heating, ventilation, and air conditioning (HVAC) requirements. For detailed telepresence room decoration instructions, see the Huawei TP3206 Telepresence Room Decoration Guide, Huawei TP3218 Telepresence Room Decoration Guide, and Huawei TP3218S Telepresence Room Decoration Guide.
Page 21
HUAWEI TP3206&TP3218&TP3218S Telepresence Installation Guide 4 Preparing for Installation Table 4-6 TP3206's, TP3218's, and TP3218S's first-row multi-functional table parts Name Quantity Description Fixture Used to locate parts in relation to each other during assembly. Left and right table legs Have the identical appearance, (L/R) indicated by the "L/R"...
Page 24
Cable trough None Cable trough decorative None part M6 x 16 screw Several None Table 4-9 Decorative parts for the TP3206's multi-functional conference table Name Quantity Description Numbered D10 to D11 from left to Front decorative part right. Rear decorative part Numbered D7 to D9 from left to right.
Page 26
4-12, unpack the cartons for acceptance. If the outer package is damaged or soaked, or the equipment has got wet and there is evidence of corrosion, stop unpacking and find the cause. Report the issue to the local Huawei representative office.
Page 29
If damage is identified, fill in the Cargo Replacement Application Form. Meanwhile, the supervisor must fill in the Cargo Shortage and Miscarriage Report and submit it to the local Huawei representative office within three days. If the delivered equipment is inconsistent with the stipulated items, move the unpacked equipment indoors for proper storage.
HUAWEI TP3206&TP3218&TP3218S Telepresence Installation Guide 4 Preparing for Installation If items included differ from those listed in the table, contact the local Huawei representative office. If any connector is damaged or loosened, or any cable is scratched, repair or replace the ...
5-1,主机架距离两侧墙面的位置请参见 Huawei TP3206 Telepresence Room Decoration Guide, Huawei TP3218 Telepresence Room Decoration Guide, and Huawei TP3218S Telepresence Room Decoration Guide. Figure 5-1 Location of the center rack Step 3 Partially tighten the screws in the bottom connecting plates (A4) to connect the three racks.
Page 96
Connection Guide. The TP3206 connects to the following 15 cables: V15 to V21, N17 to N19, P36 to P40. The TP3218 and TP3218S connect to the following 16 cables: V15 to V22, N17 to N19, P36, P36 to P40.
Page 110
The audio processing board locates in the front of the telepresence host. You do not need to install the audio processing board for the TP3206. You need to install one audio processing board for both the TP3218 and TP3218S telepresence hosts.
Page 115
Figure 9-18 Securing the audio processing board Step 3 Install the audio interface board. You do not need to install the audio interface board for the TP3206. You need to install one audio interface board for the TP3218S and two for the TP3218.
9.2.7 Installing Codecs Background The TP3206 is shipped with three codecs. Before installing the codecs, power them on and verify that video can be transmitted to the HD displays, that is, the home screen of each codec can be viewed on the HD displays.
9.2.11 Connecting Cables After the installation is complete, connect cables for the first row of the multi-functional conference table by following the steps in the HUAWEI TP3206_TP3218S_TP3218 Commissioning Guide and HUAWEI TP3206_TP3218S_TP3218 Cable Connection Guide. Cables V22 and N17 must be connected to the second row of the multi-functional conference table.
Multi-Functional Conference Table About This Chapter This chapter describes how to install the second row of the multi-functional conference table. The TP3206 has only one row of multi-functional conference table. Skip this chapter when installing the TP3206. 10.1 Parts List 10.2 Installing t h e Fixture...
Page 146
Conference Table Figure 10-17 Placing cable troughs in order Step 2 Connect cables. For cable connection details, see the HUAWEI TP3206_TP3218S_TP3218 Cable Connection Guide. Step 3 Place the decorative parts in the cable troughs. Install the decorative parts marked in the red rectangles shown in Figure 10-18 first.
Before installing the decorative parts for the multi-functional conference table, gather the parts listed in Table 14-1, Table 14-2, and Table 14-3. Table 14-1 Decorative parts for the TP3206's multi-functional conference table Name Quantity Description Front decorative part Numbered D10 to D11 from left to right. Rear decorative part Numbered D7 to D9 from left to right.
TH1000. Figure 16-1 TH1000 (1) The appearance and ports in the TP3106 are slightly different from those in the TP3206. In slot 9, install a video interface board for the TP3106 and a narrow-bezel telepresence video ...
Installation Guide 17 Telepresence Room Effect Drawing Telepresence Room Effect Drawing Figure 17-1 is an effect drawing of the TP3206 telepresence room. Figure 17-1 TP3206 telepresence room effect drawing Figure 17-2 is an effect drawing of the TP3218 telepresence room.