Commissioning Image Stitching - Huawei TP3106 Commissioning Manual

HUAWEI TP3106&TP3118&TP3118S
Commissioning Guide

5.2.6 Commissioning Image Stitching

Precautions
l
l
Issue 01 (2015-02-12)
Table 5-17 The functions of the screws
Screw
Screw 1
Screw 2
Screw 3
Screw 4
Screw 5
Adjust the lenses in the following order:
– Place the craft tool in the center of the multi-functional conference table, and adjust the
center lens.
– Place the craft tool on the right of the multi-functional conference table, and adjust the
left lens.
– Place the craft tool on the left of the multi-functional conference table, and adjust the
right lens.
When you are adjusting a lens, it is recommended that you adjust the following in sequence:
pitch angle of the lens (that is, the height of the table image), the left and right angles of
the lens for the horizontal image stitching, and then the horizontal angle of the lens.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Functions
Used to adjust the left and
right angles of the lens for
the horizontal image
stitching.
Used to adjust the pitch
angle of the lens, that is, the
height of the table image.
Used to adjust the
horizontal angle of the lens,
that is, the angle of the table
image.
Fixing screw.
5 Video Device Configuration
Remarks
Fine-tune screw 1 to adjust
the video's left and right
position.
NOTE
For the center and right
lenses, adjust their right
screw. For the left lens, adjust
its left screw.
Fine-tune screw 2 to adjust
the table image height.
NOTE
For the center and right
lenses, adjust their left screw.
For the left lens, adjust its
right screw.
Partially loosen screws 3
and 4, and lever the
plectrum between the two
screws using an Allen
wrench, to enable the top of
the table image's left and
right sides to coincide with
the orange line in the
engineering installation
diagram.
Do not loosen this screw
during adjustment.
120