Configuring Input And Output Settings - Huawei TP3106 Commissioning Manual

HUAWEI TP3106&TP3118&TP3118S
Commissioning Guide
When codecs are restored to their factory settings, all options in Icon overlap are selected for
the left and right telepresence codecs. You need to set the parameters again.
Setting the Packet Loss Threshold
Set the parameters according to the specifications provided in the
Figure 4-4 Packet Loss Threshold
Table 4-2 Packet Loss Threshold
Parameter
Threshold A (%)
Threshold B (%)

4.1.3 Configuring Input and Output Settings

From the Input/Output page, you can set video input and output parameters.
Configuring Video Input Settings
Step 1 Configure common camera settings.
1.
2.
Issue 01 (2015-02-12)
NOTICE
Choose System Settings > Input/Output > Video Input, as shown in
Figure 4-5 Common camera setings
Under Common Camera Settings (shown in the preceding figure), set the relevant
parameters according to the specifications provided in the
Table 4-3 Common Camera Settings
Parameter
Type of serial port 1
Type of serial port 2
Remote control
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Value
1
5
Value
RS232
RS232
Do not allow
4 Parameter Configuration
Figure 4-4 and Table
Remarks
Recommended value.
Recommended value.
Figure 4-5.
Table 4-3.
Remarks
Fixed value.
Fixed value.
Fixed value.
4-2.
50