Huawei TP3106 Commissioning Manual page 60

HUAWEI TP3106&TP3118&TP3118S
Commissioning Guide
2.
----End
Step 1 Configure HD OUT 1 settings.
1.
2.
Issue 01 (2015-02-12)
Under Common Settings (shown in the preceding figure), set the relevant parameters
according to the specifications provided in the
OUT 1 first and GUI to None.)
Table 4-5 Common settings
Parameter
GUI
Caption output
Main output interface
Enable SD OUT 1 interface Disable
Choose System Settings > Input/Output > Video Output, as shown in
Figure 4-8 HD OUT 1 settings
Under HD OUT 1 (shown in the preceding figure), set the relevant parameters according
to the specifications provided in the
Table 4-6 HD OUT 1 settings
Parameter
Name
Output mode
Video resolution
Stretch mode
Refresh rate
Display mode
Small window position
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Figure
Value
None
HD OUT 1
HD OUT 1
Figure 4-8.
Value
HD Video Out 1
DVI
1080P
720P
No stretch
60 Hz
Display local video and
Display remote video
Lower right corner
4 Parameter Configuration
4-7. (Set Caption output to HD
Remarks
Fixed value.
Fixed value.
Fixed value.
Fixed value.
Figure
Remarks
Fixed value.
Fixed value.
Set this parameter as
required.
Standard value for Huawei
internal network
Fixed value.
Set this parameter as
required.
Fixed value.
Fixed value.
4-8.
52