HUAWEI TP3106&TP3118&TP3118S
Commissioning Guide
Parameter
Clock mode
Sensitivity
Step 5 Configure H.323 and SIP settings, as shown in
Figure 4-42 H.323 settings
Issue 01 (2015-02-12)
Value
Slave clock 1
Long line
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
4 Parameter Configuration
Remarks
Set this parameter as
required. If the clocks on the
telepresence codecs must be
synchronous with that on the
relevant Multipoint Control
Unit (MCU), set this
parameter to Slave clock 1.
Set this parameter as
required.
Figure
4-42,
Figure 4-43
and
Table
4-29.
87