Huawei TP3106 Commissioning Manual page 69

HUAWEI TP3106&TP3118&TP3118S
Commissioning Guide
Parameter
Right HD display
Power supply (relay)
Loopback device
Left camera
Center camera
Right camera
Click the desired serial port, and select the correct device, bit rate, data bits, stop bits, and parity
(after you select a device, the system automatically populates the other fields with the default
values for that device). Then click Next.
Step 6 Configure video ports, as shown in
Figure 4-19 Wizard-Video Ports-Slot 11
Figure 4-20 Wizard-Video Ports-Slot 10
Issue 01 (2015-02-12)
Value
9600; 8; 1; None
19200; 8; 1; None
9600; 8; 1; None
115200; 8; 1; None
115200; 8; 1; None
115200; 8; 1; None
Figure
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Remarks
Fixed values.
Fixed values.
Fixed values.
Fixed values for the TC310
camera (If the camera type is
TC320, the value for 9, 10,
and 11 serial ports is No
device connected, and the
network port of the TC320
needs to be connected to port
24 of the switch.)
4-19, Figure 4-20, Figure 4-21
4 Parameter Configuration
and Table 4-12.
61