Safety; General Safety; Engine-Emission Certification; Safety And Instructional Decals - Toro Groundsmaster 7210 Series Operator's Manual

Safety

This machine has been designed in accordance with
ANSI B71.4-2017.

General Safety

This product is capable of amputating hands and
feet and of throwing objects. Always follow all safety
instructions to avoid serious personal injury.
Using this product for purposes other than its intended
use could prove dangerous to you and bystanders.
•
Read and understand the contents of this
Operator's Manual before starting the engine.
•
Use your full attention while operating the
machine. Do not engage in any activity that
causes distractions; otherwise, injury or property
damage may occur.
•
Do not put your hands or feet near moving
components of the machine.
•
Do not operate the machine without all guards
and other safety protective devices in place and
working on the machine.

Safety and Instructional Decals

Safety decals and instructions are easily visible to the operator and are located near any area
of potential danger. Replace any decal that is damaged or missing.
Battery Symbols
Some or all of these symbols are on your battery.
1. Explosion hazard
2. No fire, open flame, or
smoking.
3. Caustic liquid/chemical
burn hazard
4. Wear eye protection
5. Read the Operator's
Manual.
decalbatterysymbols
6. Keep bystanders a safe
distance from the battery.
7. Wear eye protection;
explosive gases can
cause blindness and other
injuries.
8. Battery acid can cause
blindness or severe burns.
9. Flush eyes immediately
with water and get medical
help fast.
10. Contains lead; do not
discard.
•
Keep clear of any discharge opening. Keep
bystanders and pets a safe distance away from
the machine.
•
Keep children out of the operating area. Never
allow children to operate the machine.
•
Stop the machine, shut off the engine, remove the
key, and wait for all moving parts to stop before
servicing, fueling, or unclogging the machine.
Improperly using or maintaining this machine can
result in injury. To reduce the potential for injury,
comply with these safety instructions and always
pay attention to the safety-alert symbol
means Caution, Warning, or Danger—personal safety
instruction. Failure to comply with these instructions
may result in personal injury or death.
You can find additional safety information where
needed throughout this Operator's Manual.
Engine-Emission
Certification
The engine in this machine is EPA Tier 4i and EU
Stage 3b emissions compliant.
1. Do not step here.
1. Read the Operator's
Manual.
4
, which
93-6687
93-6697
2. Add SAE 80w-90 (API
GL-5) oil every 50 hours.
decal93-6687
decal93-6697