Toro Groundsmaster 7210 Series Operator's Manual page 12

Protected Menus
There is 1 operating function that is accessed within
the Service Menu of the InfoCenter: Regeneration
request; refer to Diesel Particulate Filter Regeneration
(page 26). This function is in the Protected Menu.
Accessing Protected Menus
Note:
The factory default PIN code for you machine
is either 0000 or 1234.
If you changed the PIN code and forgot the code,
contact your authorized Toro distributor for assistance.
1. From the M M
AIN
scroll down to the S
right button (Figure
2. In the S M
ETTINGS
scroll down to the P
the right button (Figure
, use the center button to
ENU
M and press the
ETTINGS ENU
7).
Figure 7
, use the center button to
ENU
M and press
ROTECTED ENU
8A).
Figure 8
3. To enter the PIN code, press the center button
until the correct first digit appears, then press
the right button to move on to the next digit
(Figure 8B and
until the last digit is entered and press the right
button once more.
4. Press the middle button to enter the PIN code
(Figure 8D).
Wait until the red indicator light of the InfoCenter
illuminates.
Note:
If the InfoCenter accepts the PIN code
and the protected menu is unlocked, the word
"PIN" displays in the upper right corner of the
screen.
Note:
Rotate the key switch to the O
then to the O
N
You can view and change the settings in the Protected
Menu. Once you access the Protected Menu, scroll
down to Protect Settings option. Use the right button
to change the setting. Setting the Protect Settings to
O allows you to view and change the settings in
FF
the Protected Menu without entering the PIN code.
Setting the Protect Settings to O
options and requires you to enter the PIN code to
change the setting in the Protected Menu. After you
g028523
set the PIN code, rotate the key switch O
to the O position to enable and save this feature.
N
g028522
12
Figure 8C). Repeat this step
position locks the protected menu.
hides the protected
N
position and
FF
and back
FF