Toro Groundsmaster 7210 Series Operator's Manual page 33

Figure 39
2. Press the right button to change the inhibit
regeneration setting from On to Off
or from Off to On
Figure 40
Allowing a Reset Regeneration
The InfoCenter displays the high exhaust-temperature
icon when the reset regeneration is in process.
Note:
If I R
NHIBIT EGEN
displays A #185
DVISORY
to set inhibit regeneration setting to O
with the reset regeneration.
(Figure
(Figure 40).
is set to O , the InfoCenter
N
(Figure 41). Press button 3
and continue
FF
g227304
Note:
If the engine exhaust temperature is too low,
39)
the InfoCenter displays A
inform you to set the engine to full throttle (high idle).
g224691
Note:
When the reset regeneration completes, the
high exhaust-temperature
InfoCenter screen.
33
Figure 41
#186 (Figure
DVISORY
Figure 42
disappears from the
g224394
42) to
g224395