Toro Groundsmaster 7210 Series Operator's Manual page 10

InfoCenter Icon Description
SERVICE DUE
RPM
/
Indicates when scheduled service
should be performed
Engine RPM/status—indicates the
engine RPM
Hour meter
Info icon
Stationary regeneration required
Glow plugs are active
Operator must sit in seat
Parking Brake Indicator—indicates
when the parking brake is on
Coolant Temperature-indicates the
engine coolant temperature in either
°C or °F
Temperature (hot)
Denied or not allowed
Engine start
Stop or shutdown
Engine
Key switch
PIN code
CAN bus
InfoCenter
Bad or failed
Bulb
High: over allowed range
Low: under allowed range
Out of range
Switch
InfoCenter Icon Description (cont'd.)
Symbols are often
combined to form
sentences. Some
examples are shown
below
Using the Menus
To access the InfoCenter menu system, press the
menu access button while at the main screen. This
brings you to the main menu. Refer to the following
tables for a synopsis of the options available from
the menus:
Main Menu
Menu Item
Faults
Service
Settings
About
10
Operator must release switch
Operator should change to indicated
state
Engine start denied
Engine shutdown
Engine coolant too hot
Sit down or set parking brake
Description
The Faults menu contains
a list of the recent machine
faults. Refer to the Service
Manual or your Authorized
Toro Distributor for more
information on the Faults
menu and the information
contained there.
The Service menu contains
information on the machine
such as hours of use and other
similar numbers.
The Settings menu allows
you to customize and modify
configuration variables on the
InfoCenter display.
The About menu lists the
model number, serial number,
and software version of your
machine.