Advertisement
Language and Units Options
Screen
Push button 5 on the Settings screen to access the
screen to switch between English and metric units.
Use the up and down arrow keys to change the
language and unit options.
Figure 58
Screen Settings Screen
Push button 6 on the Settings screen to cycle through
the different adjustments. Use the up and down
arrows to adjust the parameters.
The Main Drilling Screen zooms into the drilling
functions. These settings adjust the delay on how
long it takes to zoom.
Figure 59
Clock Settings Screen
Push button 7 on the Settings screen to set the clock
settings options.
Once you are on this screen, push button 7 to rotate
between date, time, and 12/24.
Use the up and down arrows to adjust the parameters.
g298906
Mud or Air-Hammer Screens
Push button 8 on the Settings screen to access this
screen. Hold the OK (O) button and use the up and
down arrows to switch been mud and air hammer
modes.
Important:
Ensure that you set up the valves
per your selection. Refer to the Air Hammer
Installation Instructions.
g270216
19
Figure 60
Figure 61
Air Hammer Selected
g270212
g288871
Advertisement
