Related Manuals for Toro 22586
Summary of Contents for Toro 22586
- Page 1 Form No. 3450-171 Rev A Adjustable Forks Compact Tool Carriers Model No. 22586—Serial No. 321000001 and Up *3450-171* Register at www.Toro.com. Original Instructions (EN)
- Page 2 Figure 1 The adjustable forks attachment is a load-bearing attachment intended to be used on a Toro tool carrier. 1. Model and serial number location It is designed primarily for moving material such as posts, rocks, trees, pallets, etc. Using this product for purposes other than its intended use could prove Model No.
-
Page 3: Table Of Contents
Contents Safety Safety ............... 3 General Safety General Safety ........... 3 Slope Safety ............4 Always follow all safety instructions to avoid serious Forks Safety ............4 injury or death. Maintenance and Storage Safety......4 • Safety and Instructional Decals ......5 Do not exceed the rated operating capacity, as the machine may become unstable, which may result Setup ................ -
Page 4: Slope Safety
Slope Safety • Do not remove or add attachments on a slope. • Do not park the machine on a hillside or slope. • Operate the machine up and down slopes with the heavy end of the machine uphill. Weight distribution changes with attachments. -
Page 5: Safety And Instructional Decals
Safety and Instructional Decals Safety decals and instructions are easily visible to the operator and are located near any area of potential danger. Replace any decal that is damaged or missing. decal133-8061 133-8061 decal139-4779 139-4779 1. Tipping hazard—read the Operator’s Manual for load limits;... -
Page 6: Setup
226 kg (500 lb) extended All other models 99 kg (220 lb) To ensure optimum performance and continued safety certification of the machine, use only genuine Toro g372889 Figure 4 replacement parts and accessories. Replacement parts and accessories made by other manufacturers could be dangerous, and such use could void the Repeat the procedure for the other fork. -
Page 7: Operation
Operating Tips Operation • To adjust the forks, slide them along the frame to the desired width. Adjust the forks to the widest Installing and Removing possible setting to ensure that the load is as stable the Attachment as possible. •... -
Page 8: Storage
Storage Before long-term storage, wash the attachment with mild detergent and water to remove dirt and grime. Paint all scratched or bare metal surfaces. Note: Paint is available from your Authorized Service Dealer. Store the attachment in a clean, dry garage or storage area. - Page 9 Notes:...
- Page 10 The Toro Company (“Toro”) respects your privacy. When you purchase our products, we may collect certain personal information about you, either directly from you or through your local Toro company or dealer. Toro uses this information to fulfil contractual obligations - such as to register your warranty, process your warranty claim or to contact you in the event of a product recall - and for legitimate business purposes - such as to gauge customer satisfaction, improve our products or provide you with product information which may be of interest.
- Page 11 While the exposure from Toro products may be negligible or well within the “no significant risk” range, out of an abundance of caution, Toro has elected to provide the Prop 65 warnings. Moreover, if Toro does not provide these warnings, it could be sued by the State of California or by private parties seeking to enforce Prop 65 and subject to substantial penalties.