Toro 2226 Software Manual page 10

7. Hold the lower right button on the left joystick
(Figure 14) until the arms fully retract
22).
Figure 21
Figure 22
8. Release the button to proceed to the next step
in the sequence (Figure
Figure 23
9. Hold the lower right button on the left joystick
(Figure 14) until the cam assembly rotates to the
selected row under the pipe box
Figure 24
(Figure
g236960
g210521
23).
g236961
(Figure 24).
g210523
10. Release the button to proceed to the next step
in the sequence
11. Hold the lower right button on the left joystick
(Figure 14) until the display moves to box 1
and the elevator puts the pipe back in the pipe
box and the cam rotates to the home position
(Figure 26).
12. Release the button to start the pull-pipe process
again.
10
(Figure 25).
Figure 25
Figure 26
g236962
g210525