Toro 2226 Software Manual page 5

The following table describes the function values affected when another function is given priority.
The priority is the function with the highest value, not the value selected in the screen.
All values are dependent on the available engine horse power.
Button Priority
Pipe rotation speed
1
(Rotary RPM)
3 Rotary Torque
Thrust force (Carriage
5
Thrust)
Thrust rate (Carriage
8
Rate/Speed)
Push the X button to return to the
Deactivating Cruise
Push the cruise button to deactivate the cruise mode or push the joystick as follows:
•
Mode I: the right joystick in any direction
•
Mode II: the right or left joystick in forward or reverse.
Note:
The settings reset when the key is turned off or when you switch to carve mode.
Resuming Cruise
Push the cruise button on the joystick to resume the functions with the same settings.
Note:
The settings reset when the key is turned off or when you switch to carve mode.
Icon Description
The set rotary RPM is maintained unless the set rotary torque is
exceeded, then the rotary rpm is reduced.
The set rotary torque value is maintained unless the maximum set
rotary RPM is exceeded, then the toque value is reduced.
The set carriage thrust is maintained unless the carriage rate (speed)
is exceeded, then the thrust force is reduced.
The set carriage rate (speed) is maintained unless the maximum set
carriage thrust is exceeded, then the speed is reduced.
Main Information Screen (page
5
2).