Advertisement
Figure 33
7.
Hold the lower right button on the left joystick
(Figure
27) until the arms extend
Figure 34
8.
Release the button to proceed to the next step
in the sequence
(Figure
Figure 35
9.
Make the pipe connection; refer to Adding Drill
Pipes in the Operator's Manual.
10.
Hold the lower left button on the left joystick
(Figure
36) to release the pipe
release the button.
Figure 36
g236965
(Figure
34).
g210528
35).
g236966
(Figure
37) and
g238156
11.
Hold the lower right button on the left joystick
(Figure
27) until the arms retract and the cam
assembly returns to the home position (row 3)
(Figure
39).
12.
Release the button to start the push-pipe
process again. The cam assembly goes to
the row picked in step
SmartTouch Mode (page
12
Figure 37
Figure 38
Figure 39
2
of
Pushing Pipe in
11).
g238411
g236967
g238409
Advertisement
