Advertisement
Settings Screen Options
Carriage Settings Screen
Push button 1 on the Settings screen.
Use this screen to change the carriage settings. Push
the OK button to switch between SmartTouch and the
manual pipe loader option.
Use the up and down arrows to choose the push, pull,
or neutral setting.
Figure 52
Push Pipe: refer to Starting the First Pipe and Adding
Drill Pipes in the Drilling the Bore section in your
Operator's Manual for full instructions.
Pull Pipe: refer to Removing Drill Pipes in the Drilling
the Bore section in your Operator's Manual for full
instructions.
Manual Pipe Loader: refer to
(page
13).
g270211
Manual Pipe Loading
Control Mode Screen
Push button 2 on the Settings screen.
Use this screen to select between the 2 joystick
control options. Push the up and down buttons to
switch between Mode I and Mode II.
•
Mode I—The right joystick controls the thrust
and the rotation functions. Refer to
on the
Joystick Help Screen (page 22)
information.
•
Mode II—The right joystick controls the thrust
functions. The left joystick controls the rotation
functions. Refer to
Screen (page 22)
17
Figure 53
Figure 70
for more
Figure 71
on the
Joystick Help
for more information.
g270213
Advertisement
