Advertisement
Warning
Carriage
Engine Air Filter
Cold Hydraulic Oil
Cool Hydraulic Oil
Hot Hydraulic Oil (This icon
is replaced in version A.6
and above. See section
below.)
Low Hydraulic Oil
Software version A.5
Exit Side Lockout Disabled
Software version A.6
Hot Oil Warning
Hot Oil Caution
Icon
Description
The sensor on the drill carriage has
an error.
The air filter is restricted.
The hydraulic oil is colder than 4°C
(40° F).
The hydraulic oil is colder than
15°C (60°F).
The hydraulic oil is hotter than 93°C
(200°F).
The hydraulic oil is low and needs
to be checked and filled.
The exit side lockout is disabled
The oil temperature is between
195°F (91°C) and 210°F (99°C).
Functionality will be limited until
the temperature drops below these
levels.
The oil temperature is over 210°F
(99°C). Functionality will be limited
until the temperature drops below
these levels.
30
Resolution
•
Inspect the wires on the sensor.
•
See your Authorized Service
Dealer.
Refer to the Operator's Manual to
service the air filter.
No action required. The engine
rpm is limited to no more than 1100
rpm.
No action required. The engine
rpm is limited to no more than 1800
rpm.
No action required.
Refer to the Operator's Manual to
service the hydraulic oil.
To clear this warning, do the
following:
•
Press O to acknowledge
•
See
Exit Side Lockout Settings
(page 18)
to enable the exit
side lockout system
Push the X button to cancel the
alarm.
Push the X button to cancel the
alarm.
Advertisement
