Advertisement
Cruise Mode and Screen
Software version Rev B and up.
Cruise mode is identified by this icon:
Cruise mode provides hands-free operation for rotary and thrust, set by the operator.
Note:
Use Cruise mode for pull back only. Using cruise mode in thrust could cause damage.
You can only use cruise mode with clockwise functions.
Accessing the Cruise Screen
Push the cruise button on the joystick
screen.
Push button 4 to switch between cruise and carve modes.
Activating Cruise
1.
If necessary, set the machine limits; refer to the
2.
Hold the joystick(s) in the active position for the amount of thrust and rotation speed you want and push
the cruise button on the right joystick
Once set, use the cruise screen to adjust the settings
1.
Push buttons 1, 3, 5, or 8 to select the setting to adjust.
Note:
The icon turns green and a green circle highlights the option you select
2.
Push button 6 or 7 to increase or decrease the value of the selected setting.
(Figure
10) or push button 4 on the home screen to access the cruise
Figure 10
Main Information Screen (page
(Figure
10), then release the joysticks.
(Figure
Figure 11
4
10).
2).
(Figure
11).
g290820
g298902
Advertisement
