Optical Fiber - Huawei USG6000 Series Hardware Manual

HUAWEI USG6000 Unified Security Gateway
Hardware Guide
Figure A-15 Appearance of an unshielded cable
Technical Specifications
Table A-8
Table A-8 Technical specifications of the Ethernet cable
Item
Connector 1
and 2
Cable
Wire
A.1.7 Optical Fiber
The optical fiber is used for carrying signals on Gigabit networks or networks with a higher
packet rate.
The optical fiber connects to the SFP+ or SFP interface on the USG through an optical
module. You can select optical modules and fibers based on the interfaces of the peer device.
EdgeWave optical modules are recommended. The optical modules of other vendors may
have incompatibility issues and cause faults on the USG.
Structure and Appearance
Optical fibers are classified into single-mode and multi-mode optical fibers. Single-mode
optical fibers are used for long-distance transmission whereas multi-mode optical fibers are
used for short-distance transmission. For indoor optical fibers, the cover of single-mode
Issue 03 (2015-01-26)
The figure is for reference only.
lists the technical specifications of the Ethernet cable.
Description
Shielded RJ45/Unshielded RJ45
Category 5 or higher shielded/unshielded twisted pair network cable
8
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
A Appendix
257