Connecting A Console Cable - Huawei USG6000 Series Hardware Manual

HUAWEI USG6000 Unified Security Gateway
Hardware Guide
Figure 2-25 Installing a hard disk combination
----End
Follow-up Procedure
After the installation is complete, perform the following operations:



2.3.5 Connecting a Console Cable

After connecting a PC to the console port of a
USG6330/6350/6360/6370/6380/6390/6530/6550/6570/6620/6630 with a console cable, you
can use the terminal emulation program on the PC to access the command configuration
interface of the USG6330/6350/6360/6370/6380/6390/6530/6550/6570/6620/6630.
Context
Before connecting a console cable, perform the following operations:


Issue 03 (2015-01-26)
Before the USG is powered on, ensure that the hard disk combination is correctly
installed and screws are fastened.
After the USG is powered on, run the display disk information command in the user
view to check whether the Filesystem Status value is Mounted.
Check preparations.
A PC is ready, a USG has been installed, and the ports to be connected are planned.
Prepare cable labels.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
2 Hardware Installation
188