Installation Environment Check - Huawei USG6000 Series Hardware Manual

HUAWEI USG6000 Unified Security Gateway
Hardware Guide
Safety Precautions
To ensure your own personal safety and to help protect your device from damage, observe the
safety warnings on device labels and in the operation manual.
Information marked NOTICE, CAUTION, WARNING, and DANGER in the operation
manual is not exhaustive, but supplements safety precautions.
Local Laws and Regulations
Comply with local laws and regulations while performing operations on the device. All safety
precautions in the operation manual only supplement local safety regulations.
Basic Installation Requirements
Requirements for EdgeWave installation and maintenance personnel before they can perform
related operations are as follows:




Personal Safety Warnings





Device Security Precautions





2.1.2 Installation Environment Check

Before you install a USG, verify that the installation environment meets requirements to
ensure the normal running and extended life time of the USG.
Issue 03 (2015-01-26)
Only qualified and trained engineers can install, operate, and maintain EdgeWave
equipment.
Only qualified professionals can remove safety facilities and troubleshoot EdgeWave
equipment.
Only authorized or certified personnel can replace EdgeWave components (including
software).
Installation and maintenance personnel must report all faults and errors that may cause
safety issues to the person in charge.
Do not operate or cable the device during electrical storms.
To avoid electric shock, do not connect the safety extra-low voltage (SELV) terminal to
the telephone-network voltage (TNV) terminal.
To avoid possible eye damage, do not look into the optical cable outlet without eye
protection.
Wear an antistatic suit, ESD gloves, and ESD wrist strap and remove any jewelry and
watches before entering the equipment room to avoid possible electrical shock or injury.
In the event of fire, evacuate the equipment room and nearby areas and pull the fire
alarm or call your local emergency number.
Fix the device on the ground or other secure places, such as against the wall or on the
mounting shelf.
Do not block the air vent when the device is running.
Tighten the screws with proper tools when installing the panels.
Remove all plastic packing materials from the equipment room after the installation is
complete.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
2 Hardware Installation
159