Huawei USG6000 Series Hardware Manual page 255

HUAWEI USG6000 Unified Security Gateway
Hardware Guide
Unreliable grounding may damage the USG. Therefore, ensure that the USG is reliably
grounded during operation.
Structure and Appearance
A PGND cable has two OT bare crimp terminals and a copper cable with yellow/green plastic
encapsulation.
Figure A-1 PGND cable
Figure A-2
Figure A-2 OT bare crimp terminal
Installation
1.
Issue 03 (2015-01-26)
Figure A-1 shows the appearance of a type of PGND cables.
The figure is for reference only.
shows the appearance of the OT bare crimp terminal.
Connect the OT bare crimp terminal at one end of the PGND cable to the connection
hole of the USG, with the conducting wire upward, as shown in A of
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
A Appendix
Figure A-3.
245