Dc Power Cables - Huawei USG6000 Series Hardware Manual

HUAWEI USG6000 Unified Security Gateway
Hardware Guide
Technical Specifications
Table A-3
reference.
You must connect the AC power cable in compliance with local standards and requirements.
Table A-3 Technical specifications of the AC power cable
Item
Type of
connector on the
device
Type of
connector on the
peer end
Cable type
Maximum
voltage
Maximum
current
A.1.3 DC Power Cables
This section describes the DC power cables of the USG that uses the DC power supply. Learn
about the structure and specifications of the DC power cable before you make or purchase any
for the USG.
The DC power cables include the RTN cable, and NEG (-48 V) cable.
Structure and Appearance
Both the RTN and NEG (-48 V) power cables consist of the terminal blocks and cables, as
shown in
Issue 03 (2015-01-26)
lists the technical specifications of the AC power cables of some regions for your
Description
C13 straight female
PI straight male, PB straight male, PF straight male, and PG curving
male
2
3 x 0.8 mm
125 V/250 V
10 A
Figure A-5.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
2
/1 mm wire
A Appendix
248