Connecting A Pgnd Cable - Huawei USG6000 Series Hardware Manual

HUAWEI USG6000 Unified Security Gateway
Hardware Guide
Figure 2-9 Mounting the USG on a wall
----End
Follow-up Procedure
After wall-mounting is complete, verify that:



2.2.2 Connecting a PGND Cable

Connecting the PGND cable of a USG6310/6320 correctly is a key measure of surge
protection and resistance to interference. Before using the USG6310/6320, correctly connect
the PGND cable.
Prerequisites
The USG has been installed inside a cabinet.
Context
Instruments required:


Issue 03 (2015-01-26)
The USG is securely fixed on the wall.
A clearance of 10 cm is maintained around the USG and the air flow is not blocked.
Phillips screwdriver
Multimeter
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
2 Hardware Installation
169