Recycling And Disposal - Siemens SINAMICS S120 Equipment Manual

Service and maintenance

12.5 Recycling and disposal

Procedure
● Make sure that the device does not receive a power-on command (e.g. from the keyboard
or terminal block).
● Connect the forming circuit.
● While forming, the incandescent lamps must become less bright or go completely dark. If
the incandescent lamps continue to be brightly lit, a fault has occurred in the drive unit or
in the wiring.
● For forming using resistors, the module must remain in the circuit for approx. 1h. The
resistors will become very hot if there is a fault in the unit (surface temperature > 80 °C).
12.5 Recycling and disposal
For environmentally friendly recycling and disposal of your old device, please contact a
company certified for the disposal of electrical and electronic waste and dispose of the
device in accordance with the regulations in your country.
420
Manual, 06/2019, 6SL3097-5AL00-0BP1
AC Drive