Technical Data; Sinusoidal Filter; Description - Siemens SINAMICS S120 Equipment Manual

Motor-side power components
7.2 Chassis
7.2.1.4

Technical data

Table 7- 11 Technical data, motor reactors
Article number
Suitable for
Power Module
Unit rating of the Power
Module
Rated current
Power loss
- at 50 Hz
- at 150 Hz
Connections
- to the Motor Module (1U1,
1V1, 1W1)
- to the load (1U2, 1V2, 1W2)
- protective conductor
Max. permissible cable length
between motor reactor and
motor
- with 1 motor reactor
- with 2 motor reactors in
series
Degree of protection
Dimensions
Width
Height
Depth
Weight
7.2.2

Sinusoidal filter

7.2.2.1

Description

The sine-wave filter at the output of the Power Module supplies voltages that are virtually
sinusoidal at the motor, thereby enabling standard motors to be used without shielded cables
and without the need to reduce the power. Non-shielded cables can be used and, if long
motor supply cables are used, no additional motor reactors are required.
Sine-wave filters with a power rating of up to 200 kW are available
The pulse frequency of the Power Modules must be set to 4 kHz for the sine-wave filters.
This reduces the output current of the Power Module, see Chapter Overload capability
(Page 157).
When a sine-wave filter is used, the available output voltage decreases by 15%.
202
6SL3000- 2BE32-1AA0
6SL3310- 1TE32-1AA.
kW 110
A 210
kW 0.436
kW 0.486
M10
M10
M8
m
m
IP00
mm 300
mm 285
mm 257
kg 60
2BE32-6AA0 2BE33-2AA0
1TE32-6AA. 1TE33-1AA.
132 160
260 310
0.454 0.422
0.5 0.47
M10 M10
M10 M10
M8 M8
300 (shielded) / 450 (unshielded)
525 (shielded) / 787 (unshielded)
IP00 IP00
300 300
315 285
277 257
66 60
Manual, 06/2019, 6SL3097-5AL00-0BP1
2BE33-8AA0 2BE35-0AA0
1TE33-8AA. 1TE35-0AA.
200 250
380 490
0.447 0.448
0.5 0.5
M10 M12
M10 M12
M8 M8
IP00 IP00
300 300
285 365
277 277
73 100
AC Drive