Connection Methods; Drive-Cliq Signal Cables; Overview; Drive-Cliq Signal Cables Without 24 V Dc Cores - Siemens SINAMICS S120 Equipment Manual
Hide thumbs
Also See for SINAMICS S120:
- Function manual (1094 pages) ,
- Diagnostic manual (947 pages) ,
- Manual (848 pages)
Table of Contents
Advertisement
11.6
Connection Methods
11.6.1
DRIVE-CLiQ signal cables
11.6.1.1
Overview
To connect DRIVE-CLiQ components, various pre-assembled and non-assembled DRIVE-
CLiQ signal cables are available. The following pre-assembled DRIVE-CLiQ signal cables
will be discussed in more detail in the next sections:
● Signal cables without 24 V cores with RJ45 connectors
● MOTION-CONNECT signal cables with RJ45 connectors
● MOTION-CONNECT signal cables with RJ45 connector and M12 socket
The maximum length of the DRIVE-CLiQ MOTION-CONNECT signal cables is:
● 100 m for MOTION-CONNECT 500 cables
● 75 m for MOTION-CONNECT 800PLUS cables
Table 11- 5
Type of DRIVE-CLiQ signal cable
6SL3060-4A..
6FX2002-1DC..
6FX5002-2DC00.. bis .. -2DC20..
6FX8002-2DC00.. bis .. -2DC20..
6FX5002-2DC30..
6FX8002-2DC30..
11.6.1.2
DRIVE-CLiQ signal cables without 24 V DC cores
Pre-assembled DRIVE-CLiQ signal cables without 24 V DC cores are used to connect
components with DRIVE-CLiQ connection, which have a separate or external 24 V DC
power supply. They are mainly intended for use in control cabinets. The signal cables are
available with RJ45 connectors in degrees of protection IP20 and IP67.
Table 11- 6
DRIVE-CLiQ bridge
50 mm
100 mm
150 mm
200 mm
250 mm
AC Drive
Manual, 06/2019, 6SL3097-5AL00-0BP1
Cabinet design and EMC for components, Blocksize format
Overview of pre-assembled DRIVE-CLiQ signal cables
Actual cable lengths of DRIVE-CLiQ bridges
24 V cores
Degree of protection
IP20
-
x
x
x
x
x
(RJ45)
Cable length L
1)
110 mm
160 mm
210 mm
260 mm
310 mm
11.6 Connection Methods
Connector
type
IP67
x
RJ45
x
RJ45
x
RJ45 / M12
(M12)
377
Advertisement
Table of Contents
