Dcps, Dcns Connection For A Dv/Dt Filter; X41 Ep Terminal / Temperature Sensor Connection - Siemens SINAMICS S120 Equipment Manual

Power Modules
5.3 Power Modules Chassis
Note
If the "Safe Torque Off" function is selected, 24 V DC must be applied to terminal -X9:7 and
terminal -X9:8 must be grounded. Upon removal, pulse inhibit is activated.
5.3.2.3

DCPS, DCNS connection for a dv/dt filter

Table 5- 45
Frame size
FX
GX
The connecting cable is fed-out downwards through the Power Module.
5.3.2.4

X41 EP terminal / temperature sensor connection

Table 5- 46 Terminal block -X41
Terminal
1
2
3
4
Max. connectable cross-section: 1.5 mm² (AWG 16)
144
DCPS, DCNS
Cross-section that can be connected
1 x 35 mm² (AWG 2)
1 x 70 mm² (AWG 2/0)
Function
EP M1
(enable pulses)
EP +24 V
(Enable Pulses)
-Temp
+Temp
Connecting screw
M8
M8
Technical data
Supply voltage: 24 V DC (20.4 ... 28.8 V)
Current consumption: 10 mA
Temperature sensor KTY84-130 / PTC / Pt100 / Pt1000
Manual, 06/2019, 6SL3097-5AL00-0BP1
AC Drive