Installation Equipment - Siemens SINAMICS S120 Equipment Manual

Service and maintenance
12.3 Service and maintenance for Chassis format components
12.3.2

Installation equipment

Description
The installation equipment is used to install and remove the power blocks for Power Modules
in the chassis format.
It is placed in front of the module and attached to it. The telescopic guide support allows the
withdrawable device to be adjusted according to the height at which the power blocks are
installed. Once the mechanical and electrical connections have been released, the power
block can be removed from the module. Whereby the power block is guided and supported
by the guide rails on the withdrawable devices.
Figure 12-4
Article number of the mounting equipment: 6SL3766-1FA00-0AA0
402
Mounting equipment
Manual, 06/2019, 6SL3097-5AL00-0BP1
AC Drive