Changing The Parameter Setting Value; Displaying The Set Speed - Mitsubishi Electric FR-E700EX Instruction Manual

4.1.4

Changing the parameter setting value

Changing
Change the Pr.4 Multi-speed setting (high speed) setting.
example
Operation
1.
Screen at power-ON
The monitor display appears.
2.
Press to choose the PU operation mode.
3.
Press to choose the parameter setting mode.
4.
Turn until
5.
Press to read the currently set value.
" " (3000r/min (initial value)) appears.
6.
Turn to change the set value to "
(1800r/min).
7.
Press to set.
Turn
Press
Press
Press
REMARKS
to
appears .................... Write disable error
appears .................... Write error during operation
appears .................... Calibration error
appears .................... Mode designation error
(For details, refer to page 268.)
 The number of digits displayed on the operation panel is four. Only the upper four digits of values can be displayed and set. If
the values to be displayed have five digits or more including decimal places, the fifth or later numerals can not be displayed nor
set.
(Example) For Pr.1 (when Pr.144 = "10 (frequency setting)")
When 60Hz is set, 60.00 is displayed.
When 120Hz is set, 120.0 is displayed and second decimal place is not displayed nor set.
4.1.5

Displaying the set speed

Press the setting dial (
show the set speed.
(Pr.4) appears.
"
to read another parameter.
to show the setting again.
twice to show the next parameter.
twice to return the monitor to speed monitor.
is displayed...Why?
) in the PU operation mode or in the External/PU combined operation mode 1 (Pr.79 = "3") to
Display
PU indicator is lit.
PRM indicator is lit.
(The parameter number read previously appears.)
Hz
A
A
A
Flicker...Parameter setting complete!!
Operation panel
51
4