Mitsubishi Electric FR-E700EX Instruction Manual page 256

Useful functions
(2) Automatic parameter setting using the operation panel (parameter setting mode)
The communication setting parameters for the GOT connection with a PU connector are
Operation example
automatically set.
1.
Screen at power-ON
The monitor display appears.
2.
Press
3.
Press
parameter setting mode.
4.
Turn until
appears.
5.
Press
parameter setting mode.
6.
Turn until
7.
Press
" " appears.
8.
Turn to change it to the set value " ".
9.
Press to set.
The drive unit is not in the PU operation mode.
1.Press
2. Carry out operation from step 3 again.
254
Operation
to choose the PU operation mode.
to choose the
(AUTO)
to enter the automatic
(GOT) appears.
to read the present set value.
Turn to read another parameter.
Press to show the setting again.
Press twice to show the next parameter.
are displayed alternately ... Why?
.
is lit and the monitor (4-digit LED) displays "0." (When Pr. 79 ="0 (initial setting)")
Display
PU indicator is lit.
Flicker Parameter setting complete!!
The parameter
number read
previously appears.