Mitsubishi Electric FR-E700EX Instruction Manual page 30

Terminal
Type Terminal Name
Symbol
Speed setting power
10
supply
Speed setting
2
(voltage)
Speed setting
4
(current)
5 Speed setting common
NOTE
 Under position control, some terminals have different functions. (Refer to page 90)
 Set Pr.267 and a voltage/current input switch correctly, then input analog signals in accordance with the settings.
Applying a voltage with voltage/current input switch in "I" position (current input is selected) or a current with switch
in "V" position (voltage input is selected) could cause component damage of the drive unit or analog circuit of output
devices. (Refer to page 168 for details)
Description
Used as power supply when connecting potentiometer
for speed setting (speed setting) from outside of the
drive unit. (Refer to Pr.73 Analog input selection)
Inputting 0 to 5VDC (or 0 to 10V) provides the
maximum rotation speed at 5V (10V) and makes input
and output proportional. Use Pr.73 to switch between
input 0 to 5VDC input (initial setting) and 0 to 10VDC.
Inputting 4 to 20mADC (or 0 to 5V, 0 to 10V) provides the
maximum rotation speed at 20mA and makes input and
output proportional. This input signal is valid only when
the AU signal is ON (terminal 2 input is invalid).
To use terminal 4 (initial setting is current input), set "4" to
any of Pr.178 to Pr.184 (input terminal function selection),
and turn AU signal ON.
Use Pr.267 to switch input
Current input
among 4 to 20mA (initial
(initial status) Voltage input
setting), 0 to 5VDC and 0 to
10VDC. Set the voltage/
current input switch in the
"V" position to select voltage input (0 to 5V/0 to 10V).
Speed setting signal (terminal 2, 4) common terminal.
Do not earth (ground).
Control circuit specifications
Rated Specifications
5.2V0.2VDC
permissible load current
10mA
Input resistance 10k1k
Permissible maximum
voltage 20VDC
Current input:
Input resistance 2335
Maximum permissible
current 30mA
Voltage input:
Input resistance 10k 1k
Permissible maximum
voltage 20VDC
—
Refer to
Page
168
168
168
—
2
19