500 Hydraulic system
Removal and installation of oil seal in hydraulic pump input
Removal and installation of oil
seal in hydraulic pump input shaft
Special tools
Part number
S
796T-467-2410
Push tool
Removal
1.
Remove the hydraulic pump assembly refer-
ring to the section of "Removal and installation
of hydraulic pump assembly".
2.
Remove snap ring (1) and then remove spacer
(2).
3.
Pry off oil seal (3) with a screwdriver.
a Take care in removing the oil seal so that
the shaft may not be damaged.
PC200, 200LC, 220, 220LC-8M0
1
Part name
t 1
[*1]
Installation
q
Installation is done in the reverse order of
removal.
[*1]
2
Oil seal lip portion: Grease (G2-LI)
2
Oil seal outer periphery: Grease (G2-LI)
a Coat the oil seal outer circumference thinly
with grease.
a Press fit oil seal (3) with tool S, [1], [2].
SEN06146-00
23
50-500