Mitsubishi Electric C80 Series Connection And Set Up Manual page 71

C80 Series Connection and Setup Manual
4 General Specifications
Number Name
(1) READY LED
(2) ERROR LED
PROGRAM RUN LED
(3)
PROGRAM RUN LED
(When the Process CPU is used in
redundant mode)
(4) USER LED
(5) BATTERY LED
(6) CARD READY LED
(7) CARD ACCESS LED
(8) FUNCTION LED
(9) SPEED LED
(10) SD/RD LED
(11) RUN/STOP/RESET switch
(12) SD memory card access control switch A switch for disabling access to the SD memory card to remove it from the CPU module.
(13) SD memory card slot
*1
(14)
USB port
(15) Ethernet port
(16) Battery
(17) Battery connector pin
IB-1501452-C
Indicates the operating status of the CPU module and the error level.
[READY LED-ERROR LED status]
On-off: Normal operation
On-on: Minor error
On-flashing: Moderate error
Flashing-on: Minor error (Changing module online)
Flashing (every 2s)-off: Initial processing
Flashing (every 400ms)-off: Changing module online
Off-on/flashing: Major error
Indicates the operating status of the program.
On: Being executed (RUN state)
Flashing: Being suspended (PAUSE state)
Off: Stopped (STOP state) or stop error
Indicates the operating status of the program.
(a) Control system (CTRL LED of the redundant function module: On)
On: Being executed (RUN state)
Flashing: Being suspended (PAUSE state)
Off: Stopped (STOP state) or stop error
(b) Standby system (SBY LED of the redundant function module: On)
[Backup mode]
On: Being executed (programs being executed in both systems)
Flashing: Being suspended (PAUSE state) (programs being executed in both systems)
Off: Stopped (STOP state/RUN state/PAUSE state) (no program being executed in both
systems) or stop error
[Separate mode]
On: Being executed (RUN state)
Flashing: Being suspended (PAUSE state) or waiting for state transition to RUN (same as
STOP state)
Off: Stopped (STOP state) or stop error
(c) Systems not determined
Flashing: Waiting for state transition to RUN by switch operation (same as STOP state)
Off: Under normal operation
Indicates the status of the annunciator (F).
On: Annunciator (F) ON
Off: Normal operation
Indicates the battery status.
Flashing: Battery low
Off: Normal operation
Indicates the availability of the SD memory card.
On: Available
Flashing: Ready
Off: Not available or not inserted
Indicates the access status of the SD memory card.
On: Being accessed
Off: Not accessed
Indicates the status of the function being executed.
Refer to the following.
MELSEC iQ-R Ethernet/CC-Link IE User's Manual (Startup)
A switch for controlling the operating status of the CPU module.
RUN: Executes the program.
STOP: Stops the program.
RESET: Resets the CPU module. (Keep the switch in the RESET position for approximately
one second.)
Operate the RUN/STOP/RESET switch with your fingers. To prevent the switch from being
damaged, do not use any tool such as a screwdriver.
A slot where an SD memory card is inserted.
A connector for a USB-compatible peripheral. (connector type: miniB)
Refer to the following.
MELSEC iQ-R Ethernet/CC-Link IE User's Manual (Startup)
A backup battery to hold clock data and to use the backup power function for the device/label
memory.
A pin for connecting a lead wire of the battery.
To save the battery, the lead wire is disconnected from the connector before shipment.
40
Details